Engine Code

AUDI CJWC engine (2022–2025) – Specs, Problems & Compatibility Database

The Audi CJWC is a 1,968 cc, inline-four turbocharged diesel engine produced between 2022 and 2025. It belongs to the Volkswagen Group’s EA288 Evo engine family, featuring modular diesel architecture, dual-loop EGR, and a variable geometry turbocharger (VGT) with electric assist. In its standard configuration, it produces 140 kW (190 PS) and 400 Nm of torque, with optimized combustion efficiency and reduced NOx emissions through Bosch CRS4 high-pressure injection.

Fitted primarily to the Audi A4 (B9.5), A5 (B9.5), and Q5 (facelift) in 40 TDI trim, the CJWC was engineered for strong performance and improved real-world efficiency. It supports cylinder deactivation (ACT) under light load and integrates with a 48 V mild-hybrid system (MHEV) to enhance stop-start functionality and reduce urban emissions. Driving characteristics emphasize smooth refinement and strong mid-range pull, meeting Euro 6d emissions standards across its production run.

One documented concern is premature high-pressure fuel pump (HPFP) wear in early production units, highlighted in Audi Service Information Bulletin 2023-05-06. This issue stems from inadequate lubrication under extended oil change intervals. In 2024, Audi issued revised HPFP components and updated oil service protocols to improve long-term reliability.

BMW N47D20A Engine
Compliance Note:

All CJWC variants meet Euro 6d emissions standards (VCA UK Type Approval #VCA/EMS/9110).

CJWC Technical Specifications

The Audi CJWC is a 1,968 cc inline-four turbocharged diesel engine from the EA288 Evo family (2022–2025). It integrates dual-loop EGR, electrically assisted VGT, and 48 V MHEV technology to deliver responsive performance with reduced emissions. Designed for Euro 6d compliance, it balances economy and refinement in Audi’s mid-size lineup.

ParameterValueSource
Displacement1,968 cc
Fuel typeDiesel
ConfigurationInline-4, DOHC, 16-valve
AspirationTurbocharged with electrically assisted VGT (Garrett eVGT)
Bore × stroke81.0 mm × 95.5 mm
Power output140 kW (190 PS) @ 3,750–4,000 rpm
Torque400 Nm @ 1,750–3,000 rpm
Fuel systemBosch CRS4 common-rail (up to 2,500 bar)
Emissions standardEuro 6d
Compression ratio16.5:1
Cooling systemWater-cooled with dual-circuit thermal management
TurbochargerElectrically assisted variable-geometry turbo (Garrett eVGT)
Timing systemChain (reinforced; front-mounted with improved tensioner)
Oil typeVW 507 00 / 505 00 (SAE 0W-30)
Dry weight149 kg
Practical Implications

The eVGT and CRS4 injection provide strong low-RPM response ideal for urban driving but require strict adherence to 15,000 km oil change intervals to prevent high-pressure fuel pump wear and turbo bearing degradation. VW 507 00 (0W-30) oil is critical due to its low viscosity and protection of the HPFP and turbocharger. Extended idling and cold starts increase stress on the fuel system. The CRS4 pump demands ultra-low-sulfur diesel (ULSD) meeting EN 590 standards to prevent injector coking. Post-2024 models feature revised fuel pumps; pre-2024 units should follow Audi SIB 2023-05-06 for inspection. EGR and DPF systems require periodic cleaning to maintain emissions compliance and prevent limp-mode events.

Data Verification Notes

Oil Specs: Requires VW 507 00 / 505 00 (0W-30) specification (Audi SIB 2024-02-14). Supersedes ACEA C5.

Emissions: All CJWC models are certified to Euro 6d standards (VCA Type Approval #VCA/EMS/9110).

Power Ratings: Measured under SAE J1349 standards. 140 kW output requires EU5+ diesel (Audi TIS Doc. A28802).

Primary Sources

Audi Technical Information System (TIS): Docs A28802, A28803, SIB 2023-05-06

VCA Type Approval Database (VCA/EMS/9110)

SAE International: J1349 Engine Power Certification Standards

CJWC Compatible Models

The Audi CJWC was used across Audi's B9.5 platform with longitudinal mounting and shared architecture with Volkswagen Group siblings. This engine received platform-specific adaptations-revised intake tracts in the A4 and enhanced cooling in the Q5-and from 2024 received updated fuel system components, creating interchange limits. All adaptations are documented in OEM technical bulletins.

Make:
Audi
Years:
2022–2025
Models:
A4 (B9.5)
Variants:
40 TDI
View Source
Audi Group PT-2025
Make:
Audi
Years:
2022–2025
Models:
A5 (B9.5)
Variants:
40 TDI
View Source
Audi Group PT-2025
Make:
Audi
Years:
2023–2025
Models:
Q5 (Facelift)
Variants:
40 TDI
View Source
Audi Group PT-2025
Identification Guidance

Locate the engine code stamped vertically on the left-side cylinder block near the exhaust manifold (Audi TIS A28802). The 8th VIN digit indicates engine family ('D' for EA288 series). Pre-2024 models have silver valve covers with black plastic timing covers; post-2024 units use black valve covers. Critical differentiation from CJEB: CJWC includes eVGT and higher torque output. Service parts require production date verification - fuel pumps for engines before 05/2023 are incompatible with later units due to internal redesign (Audi SIB 2023-05-06).

Identification Details

Evidence:

Audi TIS Doc. A28802

Location:

Stamped vertically on the left-side cylinder block near the exhaust manifold (Audi TIS A28802).

Visual Cues:

  • Pre-2024: Silver valve cover with black plastic timing cover
  • Post-2024: All-black valve cover
Compatibility Notes

Evidence:

Audi SIB 2023-05-06

Fuel Components:

Fuel pumps and injectors revised in 2024 facelift models. Pre-2024 kits fit only pre-upgrade engines.
Fuel Pump Upgrade

Issue:

Early CJWC engines experienced high-pressure fuel pump wear due to insufficient lubrication during extended oil intervals.

Evidence:

Audi SIB 2023-05-06

Recommendation:

Inspect or replace HPFP per Audi SIB 2023-05-06; use only VW 507 00 oil to ensure fuel system longevity.

Common Reliability Issues - AUDI CJWC

The CJWC's primary reliability risk is high-pressure fuel pump wear on early builds, with elevated incidence in mixed urban/highway use. Internal Audi quality reports from 2025 indicated a notable share of pre-2024 engines requiring HPFP replacement before 100,000 km, while UK DVSA records link a significant portion of emissions-related MOT failures to EGR clogging in city-driven vehicles. Cold-start cycles and extended idling increase fuel system stress, making oil quality and interval adherence critical.

High-pressure fuel pump (HPFP) wear or failure
Symptoms: Hard starting, misfires, loss of power, fuel pressure DTCs, metallic debris in fuel filter.
Cause: Early-design HPFP with inadequate lubrication under extended oil intervals; exacerbated by low-quality diesel and cold-start operation.
Fix: Replace with latest OEM-specified HPFP per service bulletin; verify fuel pressure and injector condition after repair. Use only EN 590 diesel and VW 507 00 oil to prevent recurrence.
EGR valve and cooler clogging
Symptoms: Rough idle, hesitation, smoke, limp mode, increased DPF regeneration frequency.
Cause: Carbon/oil deposit accumulation in EGR valve and cooler due to extended short-trip driving and poor combustion under low load.
Fix: Clean or replace EGR valve and cooler per OEM guidance; renew vacuum lines and perform adaptation resets via diagnostics.
Electric turbocharger (eVGT) control faults
Symptoms: Reduced boost response, eVGT DTCs, loss of electric assist, warning lights.
Cause: Electronics module overheating or bearing wear in the electrically assisted turbocharger due to poor cooling or oil contamination.
Fix: Replace eVGT assembly with updated unit; inspect coolant and oil circuits for blockages; recalibrate via diagnostics.
Oil leaks from valve cover and timing cover
Symptoms: Oil smell, drips at bellhousing/undertray, residue around valve cover and timing cover.
Cause: Age-hardened valve cover and front timing cover gaskets/seals; PCV system ageing can raise case pressure.
Fix: Replace gaskets/seals with OEM parts and verify PCV function; maintain correct oil spec and intervals to minimise seepage over time.
Research Basis

Analysis derived from Audi technical bulletins (2022-2025) and UK DVSA failure statistics (2023-2025). Repair procedures should follow manufacturer guidelines.

Frequently Asked Questions about AUDI CJWC

Find answers to most commonly asked questions about AUDI CJWC.

Research Resources

Comprehensive technical documentation and regulatory references

About EngineCode.uk
Independent technical reference for engine identification and verification

Platform Overview

Independent Technical Reference

EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with AUDI or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.

Sourcing Policy

Strict Sourcing Protocol

Only official OEM publications and government portals are cited.

No Unverified Sources

No Wikipedia, forums, blogs, or third-party aggregators are used.

Transparency in Gaps

If a data point is not officially disclosed, it is marked 'Undisclosed'.

Regulatory Stability

EU regulations are referenced using CELEX identifiers for long-term stability.

Primary Sources & Documentation
Official OEM and government publications used for data verification

Primary Sources

AUDI Official Site

Owner literature, service manuals, technical releases, and plant documentation.

EUR-Lex

EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).

GOV.UK: Vehicle Approval & V5C

UK vehicle approval processes, import rules, and MoT guidance.

DVLA: Engine Changes & MoT

Official guidance on engine swaps and inspection implications.

Vehicle Certification Agency (VCA)

UK type-approval authority for automotive products.

Official Documentation

Regulatory Compliance

Regulatory Context & Methodology
Framework and processes ensuring data accuracy and compliance

Regulatory Context

Regulation (EC) No 715/2007

Euro emissions framework for vehicle type approval.

Commission Regulation (EU) 2017/1151

WLTP and RDE testing procedures for emissions certification.

GOV.UK: Vehicle Approval

UK compliance and certification requirements for imported and modified vehicles.

VCA Certification Portal

Type-approval guidance and documentation.

Methodology

Data Compilation

All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.

Corrections & Submissions

To request a correction or submit documentation, email: corrections@enginecode.uk

Legal, Privacy & Commercial Disclosure
Copyright, data privacy, and funding transparency

Copyright & Legal

Fair Dealing Use

All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.

Copyright Concerns

For copyright concerns, email: copyrights@enginecode.uk

Data Privacy

GDPR Compliance

EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.

Data Requests

For access, correction, or deletion requests, email: gdpr@enginecode.uk

Trademarks

Trademark Notice

All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.

Commercial Disclosure

No Paid Endorsements

This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.

Funding Model

Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.

Last Updated: 16 August 2025

All specifications and compatibility data verified against officialAUDI documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .

All external links open in new tabs. Please verify current availability of resources.