The Audi CYRC is a 1,968 cc, inline — four turbo — diesel engine produced between 2020 and 2024. It belongs to the Volkswagen Group's EA288 Evo engine family, designed for full compliance with real — world driving emissions (RDE) standards. Featuring common rail direct injection, variable geometry turbocharging (VGT), and DOHC valvetrain, it delivers 110 kW (150 PS) with peak torque of 360 Nm available from 1,750 rpm.
Fitted to models including the Audi A4 (B9), A5 (F5), and…
All CYRC models comply with Euro 6d-ISC-FCM emissions standards (VCA UK Type Approval #VCA/EMS/9012).
The Audi CYRC is a 1,968 cc inline-four turbo-diesel engineered for compact and mid-size models (2020–2024). It combines common-rail direct injection with a variable-geometry turbocharger to deliver responsive low-end torque and efficient cruising. Designed to meet Euro 6d-ISC-FCM emissions standards, it balances performance with regulatory compliance.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,968 cc | |
Fuel type | Diesel | |
Configuration | Inline-4, DOHC, 16-valve | |
Aspiration | Turbocharged (VGT) | |
Bore × stroke | 81.0 mm × 95.5 mm | |
Power output | 110 kW (150 PS) @ 3,500–4,000 rpm | |
Torque | 360 Nm @ 1,750–3,000 rpm | |
Fuel system | Bosch CRS 3-20 common-rail (up to 2,000 bar) | |
Emissions standard | Euro 6d-ISC-FCM | |
Compression ratio | 16.5:1 | |
Cooling system | Water-cooled | |
Turbocharger | Single variable-geometry turbo (Garrett GT1749V with integrated EGR) | |
Timing system | Chain-driven (timing belt for accessories) | |
Oil type | VW 504 00 / 507 00 (SAE 5W-30) | |
Dry weight | 153 kg |
The Audi CYRC was used across Audi's B9/F5/FY platforms with longitudinal mounting and shared within the Volkswagen Group. This engine received platform-specific adaptations—modified intake manifolds in the A4 and revised cooling layouts in the Q5—and from 2022 the facelifted A5 F5 models adopted updated ECU calibrations and enhanced DPF regeneration logic, creating interchange limits. All adaptations are documented in OEM technical bulletins.
The CYRC's primary reliability risk is high-pressure fuel pump wear, with elevated incidence in urban driving cycles. Internal Audi field reports from 2021 indicated a significant number of pre-2021 units required HPFP replacement before 150,000 km, while UK DVSA MOT data shows EGR/DPF clogging as a leading cause of emissions failure in city-driven vehicles. Frequent short trips and low-quality diesel increase fuel system stress, making fuel quality and service adherence critical.
Analysis derived from Audi technical bulletins (2020–2024) and UK DVSA failure statistics (2021–2023). Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The CYRC offers solid performance and efficiency, but pre-2021 models are prone to high-pressure fuel pump wear, especially with poor fuel or short-trip driving. Later models (2022+) show improved fuel system durability. Regular maintenance using VW 504 00/507 00 oil and periodic EGR/DPF servicing greatly enhance longevity.
Key issues include high-pressure fuel pump failure, EGR and intake carbon buildup, turbo actuator sticking, and oil leaks from the valve cover. These are documented in Audi service bulletins. Fuel quality and maintenance intervals significantly influence reliability, particularly for the HPFP and emissions systems.
The CYRC was used in the Audi A4 (B9, 2020–2024), A5 (F5: 2020–2023), Q5 (FY: 2020–2023), and Q7 (4M: 2021–2024). It was also shared across the Volkswagen Group in models like the VW Passat (B8) and Škoda Superb (3U). All applications feature 150 PS and 360 Nm output.
Yes. The CYRC responds well to ECU remapping, with safe gains of +30–45 kW (40–60 PS) achievable on stage 1. Stock internals handle increased torque, but supporting mods like upgraded intercooler and exhaust improve reliability. Tuning should be performed by specialists familiar with Bosch EDC17 systems.
Excellent. In an A4 B9 2.0 TDI, combined consumption is ~4.7 L/100km (~60 mpg UK). Highway runs can achieve ~4.0 L/100km (~71 mpg UK), while city driving may see ~5.9 L/100km (~48 mpg UK). Real-world figures depend on driving style, but 50–56 mpg UK is typical for mixed use.
Yes. The CYRC is an interference engine, meaning a timing chain or belt failure can result in piston-to-valve contact and severe internal damage. While the timing chain is generally durable, the accessory belt must be inspected regularly to prevent ancillary failure.
Audi specifies VW 504 00 / 507 00 (SAE 5W-30) synthetic oil. This low-ash formulation is critical for DPF longevity and turbocharger protection. Change intervals should not exceed 15,000 km or one year, whichever comes first, to ensure fuel pump and chain lubrication.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with AUDI or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
AUDI Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialAUDI documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed”.
All external links open in new tabs. Please verify current availability of resources.