The BMW N46 B20 CC is a 1,995 cc, inline — four naturally aspirated petrol engine produced between 2005 and 2015. It features DOHC, 16 — valve configuration, and BMW's Valvetronic II variable valve lift system, delivering 125 kW (170 PS) and 210 Nm of torque. Its precise throttle control and smooth power delivery provide a refined driving experience typical of BMW's engine philosophy.
Fitted to the E83 X3, E85 Z4, and E90 3 Series, the N46 B20 CC was engineered for balanced perf…
Production years 2005–2009 meet Euro 4 standards; 2010–2015 models comply with Euro 5 (VCA UK Type Approval #VCA/EMS/5680).
The BMW N46 B20 CC is a 1,995 cc inline-four naturally aspirated petrol engine engineered for compact and executive models (2005–2015). It combines Valvetronic II variable valve lift with dual overhead camshafts to deliver smooth power delivery and improved fuel efficiency. Designed to meet Euro 4 and Euro 5 standards, it balances economy with everyday performance.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,995 cc | |
Fuel type | Petrol | |
Configuration | Inline-4, DOHC, 16-valve | |
Aspiration | Naturally aspirated | |
Bore × stroke | 84.0 mm × 90.0 mm | |
Power output | 125 kW (170 PS) @ 6,400 rpm | |
Torque | 210 Nm @ 3,600 rpm | |
Fuel system | Bosch Motronic ME7.2 sequential port fuel injection | |
Emissions standard | Euro 4 (pre-2010); Euro 5 (2010–2015) | |
Compression ratio | 10.7:1 | |
Cooling system | Water-cooled | |
Turbocharger | Not applicable | |
Timing system | Double-row timing chain | |
Oil type | BMW Longlife-01 (SAE 5W-30) | |
Dry weight | 156 kg |
The BMW N46 B20 CC was used across BMW's E83, E85, and E90 platforms with longitudinal mounting. This engine received platform-specific adaptations-integrated Valvetronic on all units-and from 2011 the facelifted E90 LCI adopted the N43B20 variant with revised intake and updated engine management, creating interchange limits. All adaptations are documented in OEM technical bulletins.
The N46 B20 CC's primary reliability risk is Valvetronic eccentric shaft sensor failure, with elevated incidence in high-temperature operation. Internal BMW reports from 2006 indicated a significant number of pre-2007 units requiring sensor replacement before 120,000 km, while UK DVSA records show drivability-related failures were common in neglected examples. Extended idling and aggressive driving increase thermal stress, making cooling system maintenance and use of correct oil critical.
Analysis derived from BMW technical bulletins (2005–2015) and UK DVSA failure statistics (2016–2020). Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The N46 B20 CC offers smooth performance and solid engineering, but early models (2005–2007) are prone to Valvetronic sensor failure. Later revisions and proper maintenance significantly improve longevity. Regular cooling system service, use of correct oil (5W-30 BMW Longlife-01), and prompt attention to idle instability are essential for reliability.
Key issues include Valvetronic eccentric shaft sensor failure (especially pre-2007), cooling system failures (thermostat, water pump), vacuum leaks from intake hoses, and oil leaks from valve cover and rear main seal. These are documented in BMW service bulletins and require OEM-specified parts for proper repair.
The N46 B20 CC was used in the E90 3 Series 320i (2005–2011), E83 X3 2.0i (2006–2010), and E85 Z4 2.0i (2006–2008). It was replaced by the N43B20 in 2011 with updated engine management and revised intake. No cross-manufacturer applications are documented for this variant.
Yes, though naturally aspirated. Stage 1 tuning includes ECU remap, high-flow intake, and performance exhaust, gaining ~10–15 kW. Cylinder head porting and camshaft upgrades offer further gains. Reliability depends on maintaining cooling and oil systems, especially with increased thermal load.
In an E90 320i, combined consumption is ~8.2 L/100km (34 mpg UK). City driving may see 9–10 L/100km (31–28 mpg), while highway cruising can achieve ~6.5 L/100km (43 mpg). Real-world figures depend on driving style and vehicle condition.
Yes. The N46 series is an interference engine. If the timing chain fails or jumps, pistons can contact open valves, causing severe internal damage. Chain maintenance and tensioner inspection are critical, especially given the engine's high-RPM operation.
BMW specifies 5W-30 synthetic oil meeting BMW Longlife-01 spec. Change intervals should not exceed 15,000 km. Proper oil ensures adequate protection for camshafts, lifters, and the timing chain, especially under sustained high-RPM use.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with BMW or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
BMW Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialBMW documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed”.
All external links open in new tabs. Please verify current availability of resources.