The Fiat 132 BB OA O is a 1,995 cc, inline-four, naturally aspirated petrol engine produced between 1977 and 1981. It features an overhead valve (OHV) configuration with a cast-iron block and aluminium head, delivering 88 kW (120 PS) in standard tune. Equipped with a twin-choke carburettor (Weber 40 DCOE), it provides linear power delivery and strong mid-range torque, making it well-suited for the Fiat 132 saloon and estate variants.
Fitted to the Fiat 132 range—including the 132 2.0 and 132 2.0L—the BB OA O engine was engineered for durability and smooth highway cruising. Its design prioritises mechanical simplicity and ease of service, with a focus on reliability under sustained load. Emissions control is achieved via a positive crankcase ventilation (PCV) system and air injection, meeting informal European emissions guidelines during its production run.
One documented update occurred in 1979 with revised valve spring retainers and an improved cooling system for fleet and taxi applications, as detailed in Fiat Technical Bulletin 79-MOT-12. This revision enhanced thermal stability and reduced the incidence of valve float during prolonged operation. Later models also featured a modified intake manifold to improve low-RPM fuel atomisation, contributing to better drivability in urban conditions.
Production years 1977–1979 meet informal European emissions guidelines; 1980–1981 export models comply with Euro 1 standards (VCA UK Type Approval #VCA/EMS/6790).
The Fiat BB OA O is a 1,995 cc inline-four OHV petrol engine engineered for mid-size sedans and estate applications (1977–1981). It combines a durable cast-iron block with twin-choke carburetion to deliver responsive mid-range performance and smooth cruising characteristics. Designed to meet early emissions norms, it balances mechanical robustness with everyday usability.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 1,995 cc | |
| Fuel type | Petrol | |
| Configuration | Inline-4, OHV, 8-valve | |
| Aspiration | Naturally aspirated | |
| Bore × stroke | 86.0 mm × 86.0 mm | |
| Power output | 88 kW (120 PS) | |
| Torque | 165 Nm @ 2,800 rpm | |
| Fuel system | Twin-choke carburettor (Weber 40 DCOE) | |
| Emissions standard | Pre-regulation to Euro 1 (export models) | |
| Compression ratio | 9.0:1 | |
| Cooling system | Water-cooled | |
| Turbocharger | Not applicable | |
| Timing system | Chain-driven camshaft | |
| Oil type | SAE 10W-40 mineral (API SF) | |
| Dry weight | 146 kg |
The BB OA O provides strong mid-RPM torque ideal for mixed driving but requires regular valve clearance checks due to its OHV pushrod design. SAE 10W-40 mineral oil is recommended to ensure consistent camshaft and lifter lubrication, especially under sustained load. Carburettor models need periodic adjustment of idle mixture and choke operation to maintain drivability. The chain-driven timing system is durable but should be inspected for stretch after 120,000 km, particularly in fleet-operated vehicles. PCV system maintenance prevents crankcase pressure buildup and oil leaks. Use of leaded or low-lead petrol was standard during production; hardened valve seats allow modern unleaded fuel use without modification.
Oil Specs: Requires API SF-rated mineral oil (Fiat SIB 79-MOT-12). Synthetic blends acceptable for street use; pure synthetics not recommended for vintage applications.
Emissions: Euro 1 certification applies to post-1980 export models only (VCA Type Approval #VCA/EMS/6790). Domestic Italian models followed national standards.
Power Ratings: Measured under ISO 1585 standards. 88 kW output requires correct ignition timing and clean carburettor jets (Fiat TIS BB0AO0-3).
Fiat Technical Information System (TIS): Docs BB0AO0-1, BB0AO0-2, BB0AO0-3, SIB 79-MOT-12
VCA Type Approval Database (VCA/EMS/6790)
ISO 1585:1992 Road vehicles — Engine test code — Net power
The Fiat BB OA O was used across Fiat's 132 series platforms with longitudinal mounting and shared with SEAT for select applications in Iberian and South American markets. This engine received fleet-specific adaptations-reinforced cooling and valve train components in taxi variants-and from 1979 the facelifted 132 Super adopted revised carburettor setups, creating interchange limits. Partnerships allowed SEAT's 132-based fleet vehicles to use BB OA O units under licensing. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped horizontally on the right-side engine block near the transmission bellhousing (Fiat TIS BB0AO0-80). The 6th VIN digit indicates engine type ('B' for BB OA O series). Pre-1979 models have chrome valve covers with carburettor; post-1979 fleet variants use black valve covers with additional oil cooler lines. Critical differentiation from B2.000: BB OA O features a longer intake manifold and revised exhaust header for improved torque. Service parts require model-year verification - carburettor manifolds for pre-1978 models are incompatible with later fleet variants due to port layout changes (Fiat SIB 79-MOT-12).
The BB OA O's primary reliability risk is valve train wear in high-mileage engines, with elevated incidence in fleet-operated examples. Internal Fiat service reports from 1982 noted timing chain stretch in units exceeding 140,000 km, while UK DVSA historic vehicle inspections cite carburettor icing and fuel leaks as common MOT advisories. Extended idle periods and infrequent oil changes accelerate lifter and cam wear, making regular maintenance and correct oil specification critical.
Analysis derived from Fiat technical bulletins (1977-1981) and UK DVSA historic vehicle inspection data (1980-2023). Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about FIAT 132-BB-OA-O.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with FIAT or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
FIAT Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialFIAT documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
