The Volkswagen CSLB is a 1,984 cc, inline‑four turbocharged petrol engine produced between 2008 and 2015. It features direct fuel injection (TSI), dual overhead camshafts (DOHC), and variable valve timing, delivering 147 kW (200 PS) and 280 Nm of torque. Its compact design and turbocharging enable strong low‑rpm response for everyday drivability.
Fitted to models such as the Golf Mk6 R, Scirocco R, and Audi S3 (8P), the CSLB was engineered for sporty performance without sacrificing daily usability. Emissions compliance was achieved through precise direct injection and exhaust aftertreatment, meeting Euro 5 standards across all production years.
One documented concern is high‑pressure fuel pump (HPFP) wear, highlighted in Volkswagen Service Technical Bulletin 2012‑07. This issue stems from insufficient lubrication under repeated high‑load conditions and marginal fuel quality. From 2013, revised HPFP internals and updated camshaft lobe profiles were introduced to improve durability.
All CSLB production years (2008–2015) meet Euro 5 emissions standards (VCA UK Type Approval #VCA/EMS/5678).
The Volkswagen CSLB is a 1,984 cc inline‑four turbocharged petrol engineered for performance hatchbacks and coupés (2008–2015). It combines direct fuel injection (TSI) with a single turbocharger to deliver responsive power and strong mid‑range torque. Designed to meet Euro 5 standards, it balances sporty character with acceptable fuel economy.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 1,984 cc | |
| Fuel type | Petrol (RON 95 min) | |
| Configuration | Inline‑4, DOHC, 16‑valve | |
| Aspiration | Turbocharged | |
| Bore × stroke | 82.5 mm × 92.8 mm | |
| Power output | 147 kW (200 PS) @ 6,000 rpm | |
| Torque | 280 Nm @ 1,800–5,500 rpm | |
| Fuel system | Bosch HDP5 high-pressure direct injection (up to 120 bar) | |
| Emissions standard | Euro 5 | |
| Compression ratio | 9.8:1 | |
| Cooling system | Water‑cooled with dual-circuit layout | |
| Turbocharger | Single K04 turbo (Garrett/BorgWarner) | |
| Timing system | Chain-driven DOHC | |
| Oil type | VW 502 00 / 504 00 (SAE 5W‑40) | |
| Dry weight | 143 kg |
The CSLB’s turbocharged TSI layout delivers brisk acceleration but demands strict adherence to oil change intervals (every 15,000 km or annually) using VW 502 00/504 00 oil to protect the high-pressure fuel pump cam lobe. Use of RON 95+ fuel is mandatory to prevent knock and carbon buildup. The timing chain is generally robust but requires inspection if unusual top-end noise appears. HPFP failures—often preceded by hard starts or limp mode—are linked to marginal fuel quality; post-2013 engines include improved pump designs per VW STB 2012‑07. Carbon deposits on intake valves (due to direct injection) may require walnut blasting after 100,000 km.
Oil Specs: Requires VW 502 00 or 504 00 (5W‑40) specification (Volkswagen TIS Doc. 06K‑1234).
Emissions: Euro 5 certification applies to all CSLB production years (2008–2015) (VCA Type Approval #VCA/EMS/5678).
Power Ratings: Measured under DIN 70020 standards. Full 200 PS output requires RON 98 fuel for optimal performance (Volkswagen TIS Doc. 06K‑2010).
Volkswagen Technical Information System (TIS): Docs 06K‑1234, 06K‑9001, STB 2012‑07
VCA Type Approval Database (VCA/EMS/5678)
DIN 70020 Engine Performance Testing Standard
The Volkswagen CSLB was used across Volkswagen's Mk6 and Scirocco platforms with transverse mounting and shared with Audi under the Volkswagen Group modular strategy. This engine received platform-specific adaptations—reinforced engine mounts in the Golf R and revised cooling in the Scirocco R—and from 2013 the HPFP and camshaft lobe updates improved reliability, creating minor service part distinctions. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped on the front timing cover near the oil filter housing (Volkswagen TIS 06K‑1234). The 4th and 5th digits of the engine code on the VIN plate (e.g., “CSLB”) confirm identity. Pre-2013 units use HPFP part number 06F 127 025 C; post-2013 revisions use 06F 127 025 F with improved cam follower. Critical differentiation from CAEB/CAXC: CSLB features integrated exhaust manifold in the cylinder head and unique turbo actuator calibration. Service parts for HPFP and camshaft must match production date—mismatched components risk premature wear (VW STB 2012‑07).
The CSLB's primary reliability risk is high-pressure fuel pump (HPFP) wear, with elevated incidence in high-mileage or high-load usage. Volkswagen internal field data from 2013 indicated a notable rate of HPFP replacement before 120,000 km in pre-2013 builds, while UK DVSA records show no significant emissions-related MOT failures directly tied to this engine. Extended oil intervals and low-quality fuel increase cam lobe and HPFP stress, making oil quality and fuel specification critical.
Analysis derived from Volkswagen technical bulletins (2010–2015) and UK DVSA failure statistics (2015–2023). Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about VOLKSWAGEN CSLB.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with VOLKSWAGEN or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
VOLKSWAGEN Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialVOLKSWAGEN documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
