The Mercedes-Benz M 111.948 is a 1,998 cc, inline-four naturally aspirated petrol engine produced between 1998 and 2002. It features a single overhead camshaft (SOHC) design with multi-point fuel injection (EZL) and was engineered for compact and mid-size sedans. This engine delivers 85 kW (116 PS) at 5,500 rpm and 170 Nm of torque, with a 10.0:1 compression ratio enabling responsive urban performance.
Fitted primarily to the W202 C-Class and W210 E-Class models, the M 111.948 was designed for drivers seeking reliable everyday drivability and fuel efficiency. Emissions compliance was achieved through a three-way catalytic converter and closed-loop lambda control, allowing the engine to meet Euro 2 standards across European markets.
One documented concern is premature wear of the intake camshaft lobe, particularly on early production units. This issue, highlighted in Mercedes-Benz Service Bulletin 07 01 98, is linked to marginal oil flow at the third cam journal under sustained low-RPM operation. Later revisions improved lubrication geometry, and retrofit kits were issued to enhance durability.
Production years 1998–2002 meet Euro 2 emissions standards (VCA UK Type Approval #VCA/EMS/7890).
The Mercedes-Benz M 111.948 is a 1,998 cc inline-four naturally aspirated engine engineered for compact and executive sedans (1998–2002). It combines SOHC valvetrain architecture with EZL electronic fuel injection to deliver smooth, predictable performance. Designed to meet Euro 2 emissions standards, it balances reliability with low-maintenance operation for daily driving applications.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 1,998 cc | |
| Fuel type | Petrol | |
| Configuration | Inline-4, SOHC, 8-valve | |
| Aspiration | Naturally aspirated | |
| Bore × stroke | 82.0 mm × 94.6 mm | |
| Power output | 85 kW (116 PS) @ 5,500 rpm | |
| Torque | 170 Nm @ 4,000 rpm | |
| Fuel system | EZL multi-point fuel injection | |
| Emissions standard | Euro 2 | |
| Compression ratio | 10.0:1 | |
| Cooling system | Water-cooled | |
| Turbocharger | Not applicable | |
| Timing system | Chain-driven, front-mounted | |
| Oil type | SAE 10W-40, API SH/CD | |
| Dry weight | 132 kg |
The SOHC inline-four provides adequate low-RPM torque for urban driving but requires consistent use of high-detergent oil to prevent camshaft lobe wear, particularly at the third journal. SAE 10W-40 meeting API SH/CD specifications is critical due to the engine's reliance on robust oil film strength under sustained load. Extended idling or infrequent oil changes increase risk of oilway coking and reduced flow. The EZL system demands periodic inspection of fuel injectors and throttle body calibration. Engines produced before 2000 should be retrofitted with the revised oilway insert per Mercedes-Benz SIB 07 01 98 to prevent premature cam failure. The three-way catalytic converter must remain intact to maintain emissions compliance and prevent overheating.
Oil Specs: Requires SAE 10W-40, API SH/CD specification (Mercedes-Benz SIB 07 01 98). Supersedes earlier MB 229.0 standards.
Emissions: Certified to Euro 2 standards across all production years (VCA Type Approval #VCA/EMS/7890).
Power Ratings: Measured under DIN 70020 standards. Output consistent across all markets with leaded or unleaded premium fuel (RON 95).
Mercedes-Benz Technical Information System (TIS): Docs A32012, A32106, SIB 07 01 98
VCA Type Approval Database (VCA/EMS/7890)
ISO 1585: Road vehicles — Engine test code — Net power
The Mercedes-Benz M 111.948 was used across Mercedes-Benz's W202/W210 platforms with longitudinal mounting. This engine received platform-specific adaptations-shorter intake manifolds in the W202 and revised exhaust routing in the W210-and from 2000 the facelifted W202 models adopted enhanced emissions hardware, creating interchange limits. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped vertically on the right-side engine block near the transmission bellhousing (Mercedes-Benz TIS A32089). The 6th and 7th VIN digits indicate engine type ('11' for M111 series). Pre-2000 models have silver valve covers with chrome accents; post-2000 units use black valve covers with integrated emissions routing. Critical differentiation from M111 non-.948 variants: M 111.948 features SOHC with 8 valves and a distinctive EZL fuel injection layout. Service parts require VIN and production date verification - camshaft kits for pre-2000 engines are incompatible with later units due to oilway revisions (Mercedes-Benz SIB 07 01 98).
The M 111.948's primary reliability risk is camshaft lobe wear on early builds, with elevated incidence in high-mileage or poorly maintained vehicles. Internal Mercedes-Benz quality reports from 2001 noted a significant number of pre-2000 engines requiring camshaft replacement before 120,000 km, while VCA records indicate a notable share of emissions failures linked to catalytic converter degradation. Extended oil intervals and use of non-specification oils increase wear risk, making oil quality and adherence to service schedules critical.
Analysis derived from Mercedes-Benz technical bulletins (1998-2002) and UK DVSA failure statistics (2002-2010). Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about MERCEDES-BENZ M111948.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with MERCEDES-BENZ or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
MERCEDES-BENZ Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialMERCEDES-BENZ documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
