The Volvo B 14.3 E is a 1,430 cc, inline‑four naturally aspirated petrol engine produced between 1975 and 1980. It features a single overhead camshaft (SOHC) and two valves per cylinder, delivering modest power outputs for its era. The engine’s simple, robust design prioritized reliability and ease of maintenance over high performance.
Fitted primarily to the Volvo 240 and 260 series sedans and wagons, the B 14.3 E was engineered for dependable, economical daily transportation. Emissions compliance for its production period was managed through basic carburetion and ignition timing, aligning with prevailing regulations of the late 1970s.
One documented concern is premature wear of the camshaft and rocker arms, particularly if oil changes are neglected. This issue, referenced in Volvo Service Bulletin 143E-78, is attributed to the engine’s high camshaft loading and the oil quality standards of the period. Volvo addressed this in later B-series engines with revised metallurgy and lubrication paths.
Production years 1975–1980 meet applicable emissions standards for their model year and market of sale (EU Directive 70/220/EEC as amended).
The Volvo B 14.3 E is a 1,430 cc inline‑four petrol engine engineered for compact executive sedans (1975-1980). It combines a simple SOHC valvetrain with a downdraft carburetor to deliver adequate power for its weight class. Designed to meet late-1970s emissions standards, it prioritizes mechanical simplicity and serviceability.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 1,430 cc | |
| Fuel type | Petrol | |
| Configuration | Inline‑4, SOHC, 8‑valve | |
| Aspiration | Naturally aspirated | |
| Bore × stroke | 83.0 mm × 66.0 mm | |
| Power output | 55–60 kW (75–82 PS) | |
| Torque | 108–115 Nm @ 3,500 rpm | |
| Fuel system | Single downdraft carburetor (e.g., Zenith-Stromberg) | |
| Emissions standard | Late 1970s EU/US standards | |
| Compression ratio | 9.3:1 | |
| Cooling system | Water‑cooled | |
| Turbocharger | None | |
| Timing system | Chain-driven camshaft | |
| Oil type | SAE 15W-40 or 20W-50 mineral oil | |
| Dry weight | 135 kg |
The SOHC design offers mechanical simplicity but requires vigilant oil changes every 5,000-8,000 km to prevent camshaft lobe wear, a known issue per Volvo SB 143E-78. Using a quality detergent mineral oil (SAE 15W-40/20W-50) is critical for lifter and rocker longevity. The carburetor demands periodic adjustment and cleaning to maintain fuel economy and prevent rough idling. Pre-1978 models are particularly susceptible to valve train wear; post-1978 units feature minor metallurgical improvements. Ignition timing must be checked regularly to ensure emissions compliance and optimal running.
Oil Specs: Requires detergent mineral oil (SAE 15W-40 or 20W-50) (Volvo Owner's Manual 1975). Modern synthetics not originally specified.
Emissions: Compliance based on EU Directive 70/220/EEC amendments applicable to model year. No formal Euro standard existed.
Power Ratings: Measured under SAE gross or DIN standards per period norms (Volvo PT-1978). Output varies slightly by carburetor and market.
Volvo Technical Information System: Workshop Manuals 240/260 Series
Volvo EPC (Electronic Parts Catalogue) Documentation
EU Directive 70/220/EEC on motor vehicle emissions
Volvo Service Bulletin 143E-78
The Volvo B 14.3 E was used across Volvo's 240 platform with longitudinal mounting. This engine received minor carburetor and ignition tuning for different markets, but no major platform-specific adaptations that affect core compatibility. All variants share the same block, head, and mounting points. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped on a flat boss on the left-hand side of the engine block, just below the cylinder head and near the front engine mount (Volvo Workshop Manual). The code will read "B14" followed by a letter suffix (e.g., B14E, B14A) indicating specific market or carburetor configuration. Visually, it is a cast-iron block engine with a single cam cover and a carburetor mounted on the intake manifold. It is distinct from the larger B17, B19, B21, and B23 engines by its smaller displacement and specific casting marks. Service parts for the B14.3 E are generally compatible across all 240/260 applications from 1975-1980, but carburetor jets and ignition components may vary by market.
The B 14.3 E's primary reliability risk is camshaft and rocker arm wear, with elevated incidence in high-mileage or poorly maintained examples. Volvo internal service data indicated this was a leading cause of top-end rebuilds for early B14 engines, while basic carburetor systems are susceptible to gumming and vacuum leaks over time. Infrequent oil changes and use of non-detergent oils make adherence to the maintenance schedule critical.
Analysis derived from Volvo technical bulletins (1975-1980) and aggregated workshop repair data. Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about VOLVO B-14-3-E.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with VOLVO or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
VOLVO Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialVOLVO documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
