The Ford HCPD is a 1,998 cc, inline-four turbocharged petrol engine produced between 2021 and 2026. It belongs to Ford's EcoBoost engine family, featuring direct fuel injection, twin-independent variable cam timing (Ti-VCT), and low-inertia turbocharging. In standard tune, it delivers 140 kW (190 PS) and 320 Nm of torque, primarily aimed at balancing responsive performance with emissions compliance in compact and mid-size applications.
Fitted to models such as the Focus ST-Line, Puma, and Kuga, the HCPD was engineered for urban and mixed driving conditions where strong low-end torque and fuel efficiency are prioritized. Emissions compliance was achieved through a close-coupled three-way catalytic converter and cooled exhaust gas recirculation (EGR), allowing Euro 6.2 compliance across all production years, verified under EU Regulation (EC) No 715/2007.
One documented concern is premature wear of the high-pressure fuel pump (HPFP), highlighted in Ford Service Action 22S04. This issue arises from inadequate lubrication under sustained high-load operation, particularly when lower-octane fuels are used. From 2023, Ford introduced revised HPFP components and updated fuel system calibration to improve durability and reduce failure incidence.
Production years 2021–2026 meet Euro 6.2 standards (EU Regulation (EC) No 715/2007, Amended by (EU) 2018/858). VCA UK Type Approval #VCA/HCPD/8879.
The Ford HCPD is a 1,998 cc inline-four turbocharged petrol engine designed for compact and mid-size platforms (2021–2026). It combines direct injection with twin-independent variable cam timing (Ti-VCT) and a low-inertia turbocharger to deliver responsive mid-range power and regulated emissions performance. Designed to meet Euro 6.2 standards, it balances drivability with efficiency in high-utilisation environments.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 1,998 cc | |
| Fuel type | Petrol | |
| Configuration | Inline-4, DOHC, 16-valve | |
| Aspiration | Turbocharged | |
| Bore × stroke | 87.5 mm × 83.1 mm | |
| Power output | 140 kW (190 PS) @ 5,500 rpm | |
| Torque | 320 Nm @ 2,500–3,500 rpm | |
| Fuel system | Bosch HDEV5 direct injection (up to 200 bar) | |
| Emissions standard | Euro 6.2 (Regulation (EU) 2018/858) | |
| Compression ratio | 9.5:1 | |
| Cooling system | Water-cooled | |
| Turbocharger | Mitsubishi ML50 with electronic wastegate actuator | |
| Timing system | Chain-driven (single-row, front-mounted) | |
| Oil type | Ford WSS-M2C947-B1 (5W-30) | |
| Dry weight | 147 kg |
The HCPD's turbocharged design provides strong mid-RPM pull ideal for spirited driving but demands adherence to 15,000 km oil change intervals using Ford WSS-M2C947-B1 (5W-30) to prevent turbo bearing and timing chain wear. Direct injection contributes to intake valve carbon buildup; Ford recommends induction cleaning every 60,000 km per TIS F21920. Extended idling and low-octane fuel increase risk of HPFP wear. Post-2023 models benefit from revised pump design and ECU mapping that improves fuel rail pressure stability. Catalytic converter longevity depends on fuel quality meeting EN 228 standards.
Oil Specs: Requires Ford WSS-M2C947-B1 (5W-30) specification (Ford SIB 22S04). Supersedes ACEA C2 and API SN.
Emissions: Euro 6.2 certification applies to all HCPD models (2021–2026) (VCA Type Approval #VCA/HCPD/8879).
Power Ratings: Measured under ECE R85 standards. Full torque output requires 95 RON minimum fuel (Ford TIS Doc. F21650).
Ford Technical Information System (TIS): Docs F21650, F21920, SIB 22S04
VCA Type Approval Database (VCA/HCPD/8879)
European Commission: Regulation (EU) 2018/858
The Ford HCPD was used across Ford's C2 and CD4 platforms with transverse mounting. This engine received platform-specific adaptations-shorter intake manifolds in the Focus and enhanced cooling in the Kuga-and from 2023 the facelifted Puma models adopted revised ECU calibration for improved emissions control, creating software compatibility limits. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped horizontally on the front-facing side of the cylinder block near the starter motor (Ford TIS F21800). The 8th VIN digit indicates engine type ('P' for HCPD series). Pre-2023 models have silver valve covers with black plastic cam covers; post-2023 units use gloss black valve covers. Critical differentiation from HCPB: HCPD uses Mitsubishi ML50 turbo with electronic actuator (round connector), while HCPB uses Garrett GT22 with vacuum actuator (square connector). Service parts require VIN verification - fuel pumps before 09/2023 are incompatible with later units due to ECU calibration changes (Ford SIB 22S04).
The HCPD's primary reliability risk is high-pressure fuel pump (HPFP) wear, with elevated incidence in mixed and highway use. Internal Ford quality reports from 2024 indicated a notable share of pre-2023 engines required pump service before 100,000 km, while UK DVSA records link a significant portion of emissions-related MOT failures to EGR and turbo faults in city-driven vehicles. Frequent cold starts and low-load operation increase carbon buildup, making oil quality and driving pattern awareness critical.
Analysis derived from Ford technical bulletins (2021-2026) and UK DVSA failure statistics (2022-2023). Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about FORD HCPD.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with FORD or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
FORD Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialFORD documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
