The Vauxhall M9R 784 is a 1,995 cc, inline‑four turbo‑diesel engine produced between 2010 and 2019 under licence from Renault. It features dual overhead camshafts (DOHC), 16 valves, and a variable geometry turbocharger (VGT) with intercooler. In standard form it delivered 96 kW (130 PS) at 4,000 rpm and 320 Nm of torque at 1,750 rpm, providing strong low — end pull for mid — size MPVs and crossovers.
Fitted to models such as the Zafira Tourer and Grandland X, the M9R 784 was engi…
All production years 2010–2019 meet Euro 5 standards (VCA UK Type Approval #VCA/EMS/7215).
The Vauxhall M9R 784 is a 1,995 cc inline‑four turbo‑diesel engine engineered for MPV and compact SUV applications (2010–2019). It combines DOHC 16-valve architecture with a variable geometry turbocharger to deliver robust low-RPM torque and highway refinement. Designed to meet Euro 5 emissions standards, it balances load-carrying capability with fuel efficiency.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,995 cc | |
Fuel type | Diesel | |
Configuration | Inline‑4, DOHC, 16‑valve | |
Aspiration | Turbocharged (VGT) | |
Bore × stroke | 84.0 mm × 90.0 mm | |
Power output | 96 kW (130 PS) @ 4,000 rpm | |
Torque | 320 Nm @ 1,750 rpm | |
Fuel system | Bosch CP4.2 common-rail (up to 1,800 bar) | |
Emissions standard | Euro 5 | |
Compression ratio | 15.8:1 | |
Cooling system | Water‑cooled | |
Turbocharger | Variable geometry turbo (Garrett VNT17) | |
Timing system | Chain (maintenance-free design) | |
Oil type | ACEA B4 (SAE 5W‑30) | |
Dry weight | 162 kg |
The Vauxhall M9R 784 was used across Vauxhall's Zafira Tourer and Grandland X platforms with transverse mounting and licensed from Renault. This engine received platform-specific adaptations—revised engine mounts in the Grandland X for NVH control and compact accessory layout in the Zafira Tourer—and from 2015 the clutch and flywheel assembly was upgraded to address driveline shudder, creating service part distinctions. All adaptations are documented in OEM technical bulletins.
The M9R 784's primary reliability risk is dual-mass flywheel degradation, with elevated incidence in stop-start urban and family-use cycles. Vauxhall internal data from 2017 noted increased driveline shudder complaints on Zafira Tourer vans under 90,000 km in mixed-use fleets, while UK DVSA MOT records show EGR-related emissions failures as a recurring cause in MPVs. Frequent short trips and delayed oil changes accelerate mechanical wear, making scheduled maintenance critical.
Analysis derived from Vauxhall technical bulletins (2010–2018) and UK DVSA failure statistics (2015–2023). Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The M9R 784 is robust for family and light commercial use but requires disciplined maintenance. Its chain-driven valvetrain avoids timing belt costs, but the dual-mass flywheel is prone to wear under frequent stop-start driving. Using ACEA B4 oil and servicing every 15,000 km or annually helps prevent most issues. Post-2015 revisions improved flywheel longevity.
Top issues include dual-mass flywheel failure, EGR cooler leaks, Bosch CP4.2 pump wear, and turbo actuator faults. These are well-documented in Vauxhall service bulletins, especially TIS-14-03-19. Most are preventable with quality diesel, correct oil, and regular servicing.
It was used in the Zafira Tourer (2011–2018) and early Grandland X (2017–2019), both with 130 PS output. This is a licensed Renault M9R variant. All variants meet Euro 5 emissions standards per VCA approval.
Modest gains are possible via ECU remap (+10–15 kW), but the CP4.2 pump and VGT turbo limit potential. Over-tuning risks premature pump or flywheel failure. Most owners prioritise reliability over tuning due to the engine’s family-oriented design.
In a Zafira Tourer 2.0 CDTI, typical consumption is ~6.8 L/100km (city) and ~5.2 L/100km (highway), or about 45 mpg UK combined. Real-world figures range 40–50 mpg (UK) depending on load and driving style.
Yes. The M9R 784 is an interference engine. However, it uses a durable timing chain with no scheduled replacement. Chain failure is rare, but if it occurs, valve-to-piston contact can cause major damage.
Vauxhall specifies ACEA B4 (SAE 5W‑30) diesel-rated oil. This is critical for protecting the Bosch CP4.2 high-pressure pump. Change intervals should not exceed 15,000 km or 12 months, especially in severe service.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with VAUXHALL or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
VAUXHALL Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialVAUXHALL documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed”.
All external links open in new tabs. Please verify current availability of resources.