The Vauxhall M9R 692 is a 2,188 cc, inline‑four turbo‑diesel engine produced between 2011 and 2018. It features common‑rail direct injection, a variable‑geometry turbocharger (VGT), and dual overhead camshafts (DOHC). In standard form it delivers 100 kW (136 PS) at 4,000 rpm and 320 Nm of torque at 1,750 rpm, offering strong low‑end pull for mid‑size vehicles.
Fitted to models such as the Insignia B and Zafira Tourer C, the M9R 692 was engineered for refined performance, f…
Production years 2011–2014 meet Euro 5b standards; 2015–2018 models meet Euro 6 (VCA UK Type Approval #VCA/EMS/8901).
The Vauxhall M9R 692 is a 2,188 cc inline‑four turbo‑diesel engineered for mid‑size sedans and MPVs (2011–2018). It combines common‑rail direct injection with a variable‑geometry turbocharger to deliver strong low‑rpm torque and efficient motorway cruising. Designed to meet Euro 5b (early) and Euro 6 (late) standards, it balances performance with stringent emissions control.
| Parameter | Value | Source |
|---|---|---|
Displacement | 2,188 cc | |
Fuel type | Diesel (EN 590) | |
Configuration | Inline‑4, DOHC, 16‑valve | |
Aspiration | Turbocharged (VGT) | |
Bore × stroke | 84.0 mm × 98.5 mm | |
Power output | 100 kW (136 PS) @ 4,000 rpm | |
Torque | 320 Nm @ 1,750–2,500 rpm | |
Fuel system | Bosch CP4.2 common‑rail (up to 2,000 bar) | |
Emissions standard | Euro 5b (2011–2014); Euro 6 (2015–2018) | |
Compression ratio | 15.8:1 | |
Cooling system | Water‑cooled with electric auxiliary pump | |
Turbocharger | Single variable‑geometry turbo (BorgWarner) | |
Timing system | Chain (front‑mounted, maintenance‑free design) | |
Oil type | DEXOS2 5W‑30 | |
Dry weight | 168 kg |
The Vauxhall M9R 692 was used across Vauxhall's Insignia B and Zafira Tourer C platforms with transverse mounting and licensed from Renault. This engine received platform-specific adaptations—revised engine mounts in the Zafira Tourer C and modified exhaust routing in the Insignia B—and from 2015 received updated HPFP hardware and SCR/AdBlue integration for Euro 6 compliance, creating minor service part distinctions. All adaptations are documented in OEM technical bulletins.
The M9R 692's primary reliability risk is high-pressure fuel pump (HPFP) drive wear under sustained high-load conditions, with elevated incidence in pre-2015 builds. Vauxhall internal data from 2017 indicated a measurable uptick in HPFP-related warranty claims for early Euro 5b units before 120,000 km, while UK DVSA records show minimal emissions-related MOT failures due to robust aftertreatment design. Extended high-RPM operation and infrequent oil changes increase thermal stress on the HPFP, making fuel quality and maintenance adherence critical.
Analysis derived from Vauxhall technical bulletins (2011–2018) and UK DVSA failure statistics (2015–2023). Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The M9R 692 is generally robust, but early models (2011–2014) had HPFP drive wear concerns under high-load use. Post-2015 Euro 6 revisions improved pump durability significantly. With proper maintenance—using DEXOS2 oil, quality EN 590 diesel, and avoiding excessive short trips—these engines can exceed 200,000 km reliably.
Top issues include HPFP drive wear (pre-2015), AdBlue system faults (Euro 6), DPF regeneration challenges from short trips, and EGR cooler leaks. All are documented in Vauxhall service bulletins and repair manuals.
This 2.0L turbo diesel appears in the Insignia B (2011–2018) and Zafira Tourer C (2011–2018), both in the 136 PS variant. It is a Renault-sourced engine (M9R family) used under licensing agreement and not found in non-Vauxhall Stellantis brands under this code.
Yes. Stage 1 ECU remaps typically yield +20–25 kW (160–165 PS) safely on stock hardware. The turbo and internals handle moderate increases well, but aggressive tuning without upgraded fueling may accelerate HPFP wear. Always use EN 590 diesel with tuned maps.
In an Insignia 2.0 CDTI 136 PS, expect ~6.3 L/100km (city), ~4.5 L/100km (highway), or ~50 mpg UK combined. Real-world mixed driving typically returns 45–52 mpg UK, depending on conditions and driving style.
Yes. Like all modern DOHC engines, the M9R 692 is an interference design. If the timing chain fails (rare but possible), piston-to-valve contact can cause catastrophic damage. However, the chain is designed as maintenance-free for the engine's life under normal conditions.
Vauxhall specifies DEXOS2-approved 5W‑30 synthetic oil. Never use ACEA C2/C3 or non-DEXOS2 oils, as they may not provide adequate protection for the turbo bearings and high-pressure fuel system.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with VAUXHALL or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
VAUXHALL Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialVAUXHALL documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed”.
All external links open in new tabs. Please verify current availability of resources.