The Audi CCZC is a 1,968 cc, inline — four turbo — diesel engine produced between 2010 and 2018. It features a common rail direct injection system, variable geometry turbocharger (VGT), and double overhead camshafts (DOHC), delivering strong low — end torque and improved fuel efficiency for compact and mid — size Audi models. In standard tune, it produces 81 kW (110 PS) with 250 Nm of torque, making it ideal for economical daily driving and urban applications.
Fitted primari…
Production years 2010–2014 meet Euro 5 standards; 2015–2018 models comply with Euro 6 standards depending on market (VCA UK Type Approval #VCA/EMS/6789).
The Audi CCZC is a 1,968 cc inline-four turbocharged diesel engine engineered for compact and mid-size models (2010–2018). It combines common rail direct injection with a variable geometry turbocharger (VGT) to deliver responsive low-RPM torque and improved fuel economy. Designed to meet Euro 5 and Euro 6 emissions standards, it balances everyday drivability with environmental compliance.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,968 cc | |
Fuel type | Diesel | |
Configuration | Inline-4, DOHC, 16-valve | |
Aspiration | Turbocharged | |
Bore × stroke | 81.0 mm × 95.5 mm | |
Power output | 81 kW (110 PS) @ 3,750 rpm | |
Torque | 250 Nm @ 1,500–2,500 rpm | |
Fuel system | Bosch CRS 2-20 common rail (up to 2,000 bar) | |
Emissions standard | Euro 5 (pre-2015); Euro 6 (2015–2018) | |
Compression ratio | 16.5:1 | |
Cooling system | Water-cooled | |
Turbocharger | Single variable-geometry turbo (Garrett GT1544V) | |
Timing system | Timing chain (long-life, non-serviceable) | |
Oil type | VW 507 00 / 505 01 (SAE 5W-30) | |
Dry weight | 142 kg |
The Audi CCZC was used across Audi's 8X/8V/8U platforms with transverse mounting and shared architecture with Seat and Skoda for compact applications. This engine received platform-specific adaptations-shorter intake manifolds in the A1 and revised ECU tuning in the Q3-and from 2015 the facelifted A3 Sportback adopted SCR-based emissions calibration, creating interchange limits. Partnerships enabled shared production at the VW Group plant in Spain. All adaptations are documented in OEM technical bulletins.
The CCZC's primary reliability risk is high-pressure fuel pump (HPFP) wear on early builds, with elevated incidence in regions with poor diesel quality. Internal Audi quality reports from 2013 noted increased pump failures in pre-2014 units exceeding service intervals, while VCA records show a notable share of emissions-related MOT failures linked to DPF clogging in high-mileage examples. Extended idling and delayed maintenance increase pump and DPF stress, making timely servicing and correct fuel specification critical.
Analysis derived from Audi technical bulletins (2010–2018) and UK DVSA failure statistics (2015–2022). Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The CCZC is generally reliable when maintained properly, but early models (2010–2013) had high-pressure fuel pump concerns. Later revisions (post-2014) improved durability. Regular oil changes (every 15,000 km or annually) and use of quality diesel (EN 590) are essential for long-term reliability.
Key issues include high-pressure fuel pump failure, DPF clogging, EGR valve fouling, and turbo actuator sticking. These are documented in Audi service bulletins and field reports. Preventive maintenance significantly reduces risk.
The CCZC powered the Audi A1 (8X, 2010–2018), A3 (8V, 2013–2018), and Q3 (8U, 2012–2018) in 1.6L 110 PS form. It was also used in Seat Ibiza and Skoda Fabia variants. All applications were turbo-diesel with common rail injection.
Limited potential. As a 1.6L diesel with modest factory tuning, ECU remaps can gain ~20–30 PS safely. However, the stock turbo and fuel system limit higher gains. Most owners prioritize fuel economy and reliability over tuning.
In an A1, A3, or Q3, expect ~4.2 L/100km (city), ~3.8 L/100km (highway), or ~4.0 L/100km combined (~70 mpg UK). Real-world figures vary by driving style, but it's among the most efficient diesel engines in its class.
Yes. The CCZC is an interference engine. If the timing chain fails or jumps, pistons can strike open valves, causing severe internal damage. Although the chain is 'long-life', any abnormal noise should be investigated immediately.
Audi specifies SAE 5W-30 oil meeting VW 507 00 (diesel) or 505 01 (multi) standards. Use only approved synthetic oil and change every 15,000 km or annually to protect the fuel pump and turbocharger.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with AUDI or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
AUDI Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialAUDI documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed”.
All external links open in new tabs. Please verify current availability of resources.