The Audi CTYA is a 1,968 cc, inline — four turbocharged diesel engine produced between 2019 and 2023. It belongs to the EA288 Evo engine family, featuring common — rail direct injection (up to 2,500 bar), variable geometry turbocharger (VGT), and dual — loop exhaust gas recirculation (EGR). In standard tune it delivers 110 kW (150 PS), with peak torque of 360 Nm available from 1,750 rpm, providing strong low — end pulling power ideal for daily driving.
Fitted to models such as t…
Production years 2019–2023 meet Euro 6d-TEMP standards (VCA UK Type Approval #VCA/E/19745).
The Audi CTYA is a 1,968 cc inline-four turbocharged diesel engine engineered for compact and mid-size platforms (2019–2023). It integrates Bosch CRS 4-25 common-rail injection with variable geometry turbocharging to deliver responsive torque and low emissions. Designed to meet Euro 6d-TEMP standards, it balances efficiency with stringent emissions compliance.
| Parameter | Value | Source |
|---|---|---|
Displacement | 1,968 cc | |
Fuel type | Diesel | |
Configuration | Inline-4, DOHC, 16-valve | |
Aspiration | Turbocharged | |
Bore × stroke | 81.0 mm × 95.5 mm | |
Power output | 110 kW (150 PS) @ 3,250–4,200 rpm | |
Torque | 360 Nm @ 1,750–3,000 rpm | |
Fuel system | Bosch CRS 4-25 common-rail (up to 2,500 bar) | |
Emissions standard | Euro 6d-TEMP | |
Compression ratio | 16.5:1 | |
Cooling system | Water-cooled with map-controlled thermostat | |
Turbocharger | Single variable-geometry turbo (BorgWarner) | |
Timing system | Timing chain (front-mounted, maintenance-free design) | |
Oil type | Audi Longlife 05 (SAE 5W-40) | |
Dry weight | 142 kg |
The Audi CTYA was used across Audi's MQB Evo and MLB Evo platforms with transverse (MQB) and longitudinal (MLB) mounting. This engine received platform-specific adaptations-shorter intake runners in the A3 and revised cooling routing in the A6-and from 2021 the facelifted 8L A4 adopted the EA288 Evo+ update with enhanced DPF regeneration logic, creating software compatibility limits. All adaptations are documented in OEM technical bulletins.
The CTYA's primary reliability risk is high-pressure fuel pump (HPFP) actuator wear under low-fuel conditions, with elevated incidence in urban driving with frequent short trips. Internal Audi quality reports from 2021 noted a significant share of pre-2021 units requiring HPFP replacement before 100,000 km, while VCA MOT data links DPF clogging to stop-start driving in city environments. Extended idling and low-tank operation increase pump and filter stress, making fuel management and service interval adherence critical.
Analysis derived from Audi technical bulletins (2019–2023) and UK DVSA failure statistics (2020–2024). Repair procedures should follow manufacturer guidelines.
The most common questions about engine codes, what they mean, how to find them and how this database works
The CTYA is generally robust when maintained properly, but pre-2021 models have a known HPFP actuator wear issue under low-fuel conditions. Later revisions (post-2021) improved pump durability and DPF management. Regular servicing, use of EN 590 diesel, and maintaining fuel levels above 10% significantly enhance longevity. Well-maintained units can exceed 150,000 km without major repairs.
Key issues include high-pressure fuel pump actuator wear (especially below 10% fuel), diesel particulate filter clogging in city driving, cold-start timing chain rattle, and AdBlue system faults. These are documented in Audi service bulletins and addressed through component updates and software revisions from 2021 onward.
The CTYA is found in the A3 (8Y), A4 (8L), A5 (8T), and A6 (4J) models from 2019 to 2023. It was used in both transverse (MQB Evo) and longitudinal (MLB Evo) applications. Variants include 30 TDI and 35 TDI, all meeting Euro 6d-TEMP standards with SCR and AdBlue integration.
Yes. The CTYA responds well to ECU remapping, with stage 1 tunes typically adding +25–35 kW. Stock internals handle increased torque, but supporting mods (intercooler, exhaust) are recommended. Tuning must preserve DPF and SCR function. Always use reputable tuners familiar with EA288 Evo characteristics.
In combined driving, expect 5.1–5.8 L/100km (55–49 mpg UK). Highway efficiency improves to ~4.6 L/100km (61 mpg), while city driving may reach 6.5 L/100km (43 mpg). Real-world figures depend on driving style, but DPF regeneration cycles can temporarily increase consumption. Models with S-tronic transmission achieve slightly better economy.
Yes. The CTYA is an interference engine. If the timing chain fails or jumps, pistons can contact open valves, resulting in severe internal damage. While the chain is maintenance-free, tensioner wear can cause slack. Cold-start rattles should be investigated promptly to avoid costly repairs.
Audi specifies 5W-40 synthetic oil meeting Audi Longlife 05 (or newer) standards. This oil ensures proper turbo, VGT, and HPFP lubrication. Change intervals are up to 15,000 km or 1 year, but shorter intervals are advised for stop-start driving. Using incorrect oil can accelerate HPFP and chain wear.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with AUDI or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
AUDI Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialAUDI documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed”.
All external links open in new tabs. Please verify current availability of resources.