The Citroen KFT (TU3AE5) is a 1,124 cc, inline-three petrol engine produced between 2001 and 2004. Part of the PSA TU engine family, it delivers economical performance for compact city cars. Equipped with a single overhead camshaft (SOHC) and multi-point fuel injection, it produces 45 kW (61 PS) with 93 Nm of torque, offering light and responsive urban driving characteristics.
Fitted primarily to the Citroën C3 and Peugeot 107, the KFT (TU3AE5) was engineered for low running costs, ease of maintenance, and compact packaging. Emissions compliance was achieved through a three-way catalytic converter and lambda feedback control, meeting Euro 3 standards across its production run. Its lightweight design and low friction internals contribute to strong fuel economy in stop-start conditions.
One documented concern is premature camshaft wear observed in certain 2001–2002 production units, highlighted in PSA Technical Bulletin TGB005. This issue is attributed to marginal oil flow design in early cylinder heads. From 2003 onward, revised oil gallery machining and upgraded camshafts were implemented to resolve the issue.
Production years 2001–2004 meet Euro 3 standards (VCA UK Type Approval #VCA/EMS/8901).
The Citroen KFT (TU3AE5) is a 1,124 cc inline-three petrol engine engineered for compact city cars (2001–2004). It combines SOHC 12-valve architecture with multi-point fuel injection to deliver efficient, lightweight performance. Designed to meet Euro 3 emissions standards, it prioritizes fuel economy and mechanical simplicity.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 1,124 cc | |
| Fuel type | Petrol | |
| Configuration | Inline-3, SOHC, 12-valve | |
| Aspiration | Naturally aspirated | |
| Bore × stroke | 75.0 mm × 84.8 mm | |
| Power output | 45 kW (61 PS) @ 5,800 rpm | |
| Torque | 93 Nm @ 3,000 rpm | |
| Fuel system | Multi-point fuel injection (Siemens SIM1K) | |
| Emissions standard | Euro 3 | |
| Compression ratio | 9.7:1 | |
| Cooling system | Water-cooled | |
| Turbocharger | Not applicable | |
| Timing system | Timing belt (interval: 90,000 km or 6 years) | |
| Oil type | SAE 10W-30, ACEA A1/A2 | |
| Dry weight | 88 kg |
The naturally aspirated SOHC design provides predictable, low-stress performance ideal for urban use, but demands strict timing belt maintenance to prevent engine damage. SAE 10W-30 ACEA A1/A2 oil is recommended to ensure adequate camshaft lubrication, particularly in early production units. Cold-start idling should be minimized to reduce wear during warm-up. The Siemens SIM1K injection system requires periodic injector cleaning to maintain fuel atomization and idle stability. Post-2003 models feature improved cylinder head oiling; pre-2003 engines should be inspected for cam lobe wear per PSA TGB005. The three-way catalytic converter requires unleaded fuel meeting EN 228 standards to prevent poisoning.
Oil Specs: Requires ACEA A1/A2 specification (PSA SIB TGB005). BMW Longlife or VW 502 00 not compatible.
Emissions: Euro 3 certification applies to all KFT (TU3AE5) models (2001–2004) (VCA Type Approval #VCA/EMS/8901).
Power Ratings: Measured under ECE R85 standards. Output consistent across fuel qualities meeting EN 228 (PSA TIS TU3015).
PSA Technical Information System (TIS): Docs TU3005, TU3015, TGB005
VCA Type Approval Database (VCA/EMS/8901)
ISO 1585:1996 Road vehicles — Engine test code — Net power
The Citroen KFT (TU3AE5) was used across Citroen's C3 platform with transverse mounting and shared with Peugeot under PSA platform commonality. This engine received model-specific tuning-for lighter throttle response in the C3-and from 2003 the updated cylinder head with revised oil galleries, creating interchange limits. Partnerships within the PSA Group allowed Peugeot's 107 to use identical powertrain calibration. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped vertically on the left-side engine block near the transmission bellhousing (PSA TIS TU3006). The 8th VIN digit indicates engine type ('K' for KFT series). Pre-2003 models have a silver cam cover with black intake manifold; post-2003 units use black cam covers. Critical differentiation from TU3J: KFT (TU3AE5) has Siemens SIM1K ECU with round diagnostic connector, while TU3J uses Magneti Marelli with rectangular port. Service parts require production date verification - timing belts for engines before 03/2003 are incompatible with later revised tensioners (PSA SIB TGB005).
The KFT (TU3AE5)'s primary reliability risk is premature camshaft wear on early builds, with elevated incidence in high-mileage vehicles. PSA internal reports from 2003 noted a significant number of pre-2003 engines requiring camshaft replacement before 120,000 km, while UK DVSA MOT records show timing belt neglect as a frequent cause of engine failure. Extended service intervals and short-trip driving increase wear risk, making adherence to maintenance schedules critical.
Analysis derived from PSA technical bulletins (2001-2004) and UK DVSA failure statistics (2002-2006). Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about CITROEN KFT-TU3AE5.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with CITROEN or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
CITROEN Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialCITROEN documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
