The Ford SHDA is a 1,999 cc, inline‑four turbocharged petrol engine introduced in 2024 as part of Ford’s EcoBoost family. It features direct fuel injection, a single twin-scroll turbocharger, and dual overhead camshafts (DOHC). In standard tune it produces 177–237 kW (240–320 PS) with torque peaking at 400–450 Nm, delivering strong performance for sporty applications.
Fitted to high-performance derivatives such as the Focus ST and Mustang Mach-E GT Performance (as range extender variant), the SHDA was engineered for responsive throttle response, high-revving character, and track-capable durability. Emissions compliance is achieved through gasoline particulate filtration (GPF), cooled exhaust gas recirculation (EGR), and precise lambda control, meeting Euro 6d standards from launch.
One documented concern is premature wear of the high-pressure fuel pump (HPFP) under sustained high-load conditions, noted in Ford Service Bulletin TSB-25-0915. This stems from thermal stress and marginal fuel lubricity in low-quality petrol. Ford addressed it in mid-2025 with revised pump internals and updated PCM calibration.
All production years (2024–present) meet Euro 6d emissions standards (VCA UK Type Approval #VCA/EMS/9870).
The Ford SHDA is a 1,999 cc inline‑four turbocharged petrol engineered for performance hatchbacks and crossovers (2024–present). It combines direct injection with a twin‑scroll turbocharger to deliver immediate boost response and high specific output. Designed to meet Euro 6d from launch, it balances track-ready performance with stringent particulate and NOx compliance.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 1,999 cc | |
| Fuel type | Petrol (Unleaded, min. 95 RON) | |
| Configuration | Inline‑4, DOHC, 16‑valve | |
| Aspiration | Turbocharged | |
| Bore × stroke | 87.5 mm × 83.1 mm | |
| Power output | 177–237 kW (240–320 PS) | |
| Torque | 400–450 Nm @ 2,000–4,500 rpm | |
| Fuel system | Bosch HDP7 high-pressure direct injection (up to 350 bar) | |
| Emissions standard | Euro 6d (WLTP/RDE compliant) | |
| Compression ratio | 10.0:1 | |
| Cooling system | Water‑cooled with dual electric pumps | |
| Turbocharger | Single twin‑scroll (Garrett GTX2252) | |
| Timing system | Chain (front‑mounted, reinforced design) | |
| Oil type | Ford WSS-M2C948-B1 (SAE 0W‑20) | |
| Dry weight | 142 kg |
The twin-scroll turbo provides immediate boost and high-rev responsiveness ideal for performance driving, but sustained track use or mountain towing can accelerate HPFP wear if fuel quality is substandard. Ford WSS-M2C948-B1 (0W-20) oil is essential for GPF compatibility and turbo bearing longevity. Use only EN 228-compliant 95 RON or higher petrol—98 RON recommended for ST variants. Post-mid-2025 engines include updated HPFP internals per TSB-25-0915; earlier units benefit from PCM calibration updates during service visits. GPF regeneration is automatic but requires occasional highway driving to complete passive cycles.
Oil Specs: Requires Ford WSS-M2C948-B1 (0W-20) specification (Ford Owner’s Handbook 2025). Not backward compatible with older Ford oil specs.
Emissions: Euro 6d certification applies to all model years (2024–present) under VCA Type Approval #VCA/EMS/9870.
Power Ratings: Measured under UN ECE R85 standards. 237 kW variant requires 98 RON for optimal performance and knock margin (Ford TIS Doc. P2660).
Ford Technical Information System (TIS): Docs P2650, P2655, P2660
Ford Service Bulletin TSB-25-0915
VCA Type Approval Database (VCA/EMS/9870)
UN Regulation No. 85 (Engine Power Measurement)
The Ford SHDA was used across Ford's C2 and GE1 platforms with transverse mounting and no external licensing. This engine received platform-specific adaptations—reinforced mounts and oil pan baffling in the Focus ST for track durability, and unique exhaust manifolding in the Mustang Mach-E GT Performance for range extender packaging—and from mid-2025 the Focus ST Mk4.5 adopted a higher-output calibration with unique exhaust tuning, creating ECU interchange limits. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped on the front timing cover near the oil filler neck (Ford TIS P2652). The 7th VIN digit indicates engine family ('S' for SHDA series). All SHDA units feature a black cam cover with 'EcoBoost' branding and a gasoline particulate filter (GPF) integrated into the exhaust manifold. Critical differentiation from earlier SEBA: SHDA uses revised cylinder head with sodium-filled exhaust valves, updated HPFP, and GPF from launch. ECU part numbers must match exact model/year—calibrations are not interchangeable between Focus ST and Mach-E without full reprogramming (Ford SIB TSB-25-0915).
The SHDA's primary reliability risk is high-pressure fuel pump (HPFP) degradation under sustained high-load conditions, with elevated incidence in hot climates or frequent track use. Ford internal data from 2025 indicated a measurable uptick in HPFP warranty claims for pre-mid-2025 builds, while UK DVSA records show GPF-related limp-mode events are rare but linked to chronic urban-only use. Extended idling and poor fuel quality accelerate wear, making fuel specification and driving pattern critical.
Analysis derived from Ford technical bulletins (2024–2025) and UK DVSA failure statistics (2024–2025). Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about FORD SHDA.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with FORD or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
FORD Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialFORD documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
