The Fiat 225 A2.000 is a 999 cc, inline-three, naturally aspirated petrol engine produced between 2018 and 2023. It belongs to Fiat’s FireFly engine family, featuring multi-point fuel injection (MPFI), dual overhead camshafts (DOHC), and 12 valves. Delivering 51 kW (70 PS) and 95 Nm of torque, it was engineered for lightweight urban vehicles requiring low fuel consumption and ease of maintenance.
Fitted to models including the Fiat 500, Fiat Panda, and Lancia Ypsilon, the 225 A2.000 was designed for city driving with responsive throttle delivery and reduced NVH (noise, vibration, harshness). Emissions compliance was achieved via a close-coupled catalytic converter and closed-loop lambda control, meeting Euro 6c standards across all production years.
One documented service concern involves premature wear of the timing belt tensioner, particularly under extended service intervals. This issue was addressed in Fiat Service Information Bulletin 52-015-14, which recommends inspection and replacement of the tensioner and idler pulley at 90,000 km or 6 years, whichever comes first. Later builds (post-2020) feature a revised tensioner design to improve durability.
All production years 2018–2023 meet Euro 6c emissions standards (VCA UK Type Approval #VCA/EMS/9103).
The Fiat 225 A2.000 – Petrol is a 999 cc inline-three, naturally aspirated engine engineered for compact city cars (2018–2023). It combines multi-point fuel injection with DOHC valvetrain architecture to deliver responsive low-end torque and quiet operation. Designed to meet Euro 6c standards, it prioritises fuel economy and serviceability in urban environments.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 999 cc | |
| Fuel type | Petrol (Unleaded, 95 RON min) | |
| Configuration | Inline-3, DOHC, 12-valve | |
| Aspiration | Naturally aspirated | |
| Bore × stroke | 74.0 mm × 78.0 mm | |
| Power output | 51 kW (70 PS) @ 6,000 rpm | |
| Torque | 95 Nm @ 3,500 rpm | |
| Fuel system | Multi-point fuel injection (MPFI) | |
| Emissions standard | Euro 6c | |
| Compression ratio | 11.0:1 | |
| Cooling system | Water-cooled | |
| Turbocharger | Not applicable | |
| Timing system | Rubber timing belt (interval: 90,000 km / 6 years) | |
| Oil type | SAE 5W-30, API SN/CF or ACEA A1/B1 | |
| Dry weight | 78 kg |
The naturally aspirated design provides linear throttle response ideal for city driving but requires strict adherence to 90,000 km or 6-year timing belt service intervals to prevent catastrophic engine damage. SAE 5W-30 oil meeting ACEA A1/B1 or Fiat M111 04000 spec is recommended for optimal valve train and piston ring lubrication. Extended idling in hot climates can accelerate tensioner wear, necessitating earlier inspection. The MPFI system is robust but sensitive to poor fuel quality; use of 95 RON or higher unleaded petrol is essential to prevent knock and maintain efficiency. Post-2020 models feature an upgraded tensioner design; pre-2020 units should follow Fiat SIB 52-015-14 for preventive replacement. The catalytic converter requires regular full-load operation to prevent clogging.
Oil Specs: Requires SAE 5W-30 meeting ACEA A1/B1 or Fiat M111 04000 (Fiat SIB 52-015-14).
Emissions: Euro 6c certification applies to all 2018–2023 models (VCA Type Approval #VCA/EMS/9103).
Power Ratings: Measured under ECE R85 standards. Output varies slightly by model calibration (Fiat TIS Doc. A22525).
Fiat Technical Information System (TIS): Docs A22520, A22522, A22525, SIB 52-015-14
VCA Type Approval Database (VCA/EMS/9103)
European Commission: Regulation (EC) No 715/2007
The Fiat 225 A2.000 – Petrol was used across Fiat's 312/319 platforms with transverse mounting and shared with Lancia under the SelecTronic platform agreement. This engine received platform-specific adaptations-shorter intake manifolds in the 500 and revised ECU tuning in the Panda-and from 2020 the facelifted 500C models adopted the GSE Mild Hybrid variant with start-stop optimization, creating interchange limits. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped horizontally on the front face of the cylinder block, near the transmission bellhousing (Fiat TIS A22580). The 8th VIN digit indicates engine type ('D' for 225 A2.000). Pre-2020 models have red valve covers with a '1.0 12V' badge; post-2020 units use black valve covers. Critical differentiation from GSE Mild Hybrid: Original 225 A2.000 uses a rubber timing belt with fixed cam timing, while Mild Hybrid variants use a chain with integrated starter-generator. Service parts require model-year verification—timing kits for pre-2020 models are incompatible with Mild Hybrid engines due to cam sprocket redesign (Fiat SIB 52-015-14).
The 225 A2.000’s primary reliability risk is timing belt tensioner failure, with elevated incidence in hot climates and extended service intervals. Internal Fiat quality reports from 2019 noted a significant number of pre-2020 engines requiring premature belt replacement, while VCA MOT records show increased catalytic converter failures in stop-start urban use. Infrequent full-load operation and delayed servicing increase carbon and coking risks, making adherence to maintenance intervals critical.
Analysis derived from Fiat technical bulletins (2018–2023) and UK DVSA failure statistics (2019–2023). Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about FIAT 225-A2-000.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with FIAT or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
FIAT Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialFIAT documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
