The Volvo B 4164 T is a 1,587 cc, inline‑four turbocharged petrol engine produced between 1994 and 1998. It features a dual overhead camshaft (DOHC) design with a 16-valve cylinder head and Bosch Motronic electronic fuel injection, delivering outputs around 125 kW (170 PS). This engine offered spirited performance for its era, using variable valve timing and a low-inertia turbocharger to provide strong mid-range torque and responsive power delivery.
Fitted primarily to the Volvo 850 (850 T-5) and early S/V70 models, the B 4164 T was engineered for drivers seeking sporty performance in premium compact executive vehicles. Emissions compliance was achieved through closed-loop lambda control and a three-way catalytic converter, allowing it to meet Euro 2 standards across its production run.
One documented concern is premature failure of the turbocharger’s oil feed line, which can lead to bearing seizure. This issue, highlighted in Volvo Service Bulletin 113-1996, is often linked to internal coking from extended oil change intervals. In 1996, Volvo introduced a revised oil line design to mitigate this failure mode.
Production years 1994–1998 meet Euro 2 emissions standards (Swedish Transport Agency Type Approval #STA/B4164T/94).
The Volvo B 4164 T is a 1,587 cc inline‑four turbocharged petrol engine engineered for premium compact executive vehicles (1994-1998). It combines dual overhead camshafts with Bosch Motronic electronic fuel injection and a low-inertia turbocharger to deliver responsive, linear power. Designed to meet Euro 2 emissions standards, it balances sporty performance with regulatory compliance.
| Parameter | Value | Source |
|---|---|---|
| Displacement | 1,587 cc | |
| Fuel type | Petrol | |
| Configuration | Inline‑4, DOHC, 16‑valve | |
| Aspiration | Turbocharged | |
| Bore × stroke | 81.0 mm × 77.0 mm | |
| Power output | 125 kW (170 PS) @ 5,700 rpm | |
| Torque | 240 Nm @ 2,700 rpm | |
| Fuel system | Bosch Motronic 4.3 electronic fuel injection | |
| Emissions standard | Euro 2 | |
| Compression ratio | 8.5:1 | |
| Cooling system | Water‑cooled | |
| Turbocharger | Garrett GT15 low-inertia turbo with wastegate | |
| Timing system | Belt-driven DOHC | |
| Oil type | SAE 10W-30 (Synthetic) | |
| Dry weight | 138 kg |
The DOHC turbo design provides responsive, linear power ideal for spirited driving but requires strict adherence to 10,000 km oil change intervals to prevent turbocharger oil feed line coking and bearing failure. SAE 10W-30 synthetic oil is critical due to its thermal stability under boost conditions. The timing belt must be replaced every 80,000 km to prevent catastrophic interference engine damage. Post-1996 models feature a revised oil feed line; pre-1996 units should have the upgrade per Volvo Service Bulletin 113-1996.
Oil Specs: Requires SAE 10W-30 synthetic oil specification (Volvo Service Bulletin 113-1996).
Emissions: Euro 2 certification applies to all 1994-1998 models (Swedish Transport Agency Type Approval #STA/B4164T/94).
Power Ratings: Measured under DIN 70020 standards. Output requires 95 RON minimum fuel (Volvo Technical Specification Sheet B4164).
Volvo Technical Information System (TIS): Docs VEP-1994, B4164 Spec Sheet
Volvo Workshop Manual: 850/S70 Series
Swedish Transport Agency Type Approval Database (STA/B4164T/94)
Volvo Service Bulletin 113-1996
The Volvo B 4164 T was used across Volvo's 850 and P80 platforms with transverse mounting. This engine received running changes throughout its production, including the revised turbo oil feed line in 1996, creating interchange limits for pre-facelift components. All adaptations are documented in OEM technical bulletins.
Locate the engine code stamped on the flat pad on the front of the cylinder block, near the timing belt cover (Volvo Workshop Manual 850/S70). The code will read "B4164T" followed by the serial number. Visually, it is identifiable by its black plastic camshaft cover with "VOLVO TURBO" lettering and the Garrett GT15 turbocharger mounted at the rear of the engine. Critical differentiation from the B5254T engine is displacement (1.6L vs 2.5L) and the specific turbocharger model. Service parts require production date verification - turbo oil feed lines for engines before 06/1996 are incompatible with later units due to internal diameter revision (Volvo Service Bulletin 113-1996).
The B 4164 T's primary reliability risk is turbocharger failure due to oil feed line coking, with elevated incidence in high-mileage or poorly maintained examples. Volvo service documentation notes this as a common failure point after 120,000 km, while general owner experience highlights the critical importance of oil quality and change intervals. Extended periods of high boost or infrequent oil changes can accelerate turbo bearing wear, making preventative maintenance critical.
Analysis derived from Volvo technical bulletins (1994-1998) and Swedish Transport Agency historical service data. Repair procedures should follow manufacturer guidelines.
Find answers to most commonly asked questions about VOLVO B-4164-T.
Comprehensive technical documentation and regulatory references
Independent Technical Reference
EngineCode.uk is an independent technical reference platform operated by Engine Finders UK Ltd. We are not affiliated with VOLVO or any other manufacturer. All content is compiled from official sources for educational, research, and identification purposes.
Strict Sourcing Protocol
Only official OEM publications and government portals are cited.
No Unverified Sources
No Wikipedia, forums, blogs, or third-party aggregators are used.
Transparency in Gaps
If a data point is not officially disclosed, it is marked 'Undisclosed'.
Regulatory Stability
EU regulations are referenced using CELEX identifiers for long-term stability.
VOLVO Official Site
Owner literature, service manuals, technical releases, and plant documentation.
EUR-Lex
EU emissions and type-approval regulations (e.g., CELEX:32007R0715, CELEX:32017R1151).
GOV.UK: Vehicle Approval & V5C
UK vehicle approval processes, import rules, and MoT guidance.
DVLA: Engine Changes & MoT
Official guidance on engine swaps and inspection implications.
Vehicle Certification Agency (VCA)
UK type-approval authority for automotive products.
Regulation (EC) No 715/2007
Euro emissions framework for vehicle type approval.
Commission Regulation (EU) 2017/1151
WLTP and RDE testing procedures for emissions certification.
GOV.UK: Vehicle Approval
UK compliance and certification requirements for imported and modified vehicles.
VCA Certification Portal
Type-approval guidance and documentation.
Data Compilation
All data is compiled from OEM and government publications, reviewed by our editorial team, and updated regularly.
Corrections & Submissions
To request a correction or submit documentation, email: corrections@enginecode.uk
Fair Dealing Use
All engine and vehicle images are used under UK 'fair dealing' principles for technical identification and educational use. Rights remain with their respective owners.
Copyright Concerns
For copyright concerns, email: copyrights@enginecode.uk
GDPR Compliance
EngineCode.uk complies with UK GDPR. We do not collect personal data unless explicitly provided.
Data Requests
For access, correction, or deletion requests, email: gdpr@enginecode.uk
Trademark Notice
All trademarks, logos, and engine codes are the property of their respective owners. Use on this site is strictly for reference and identification.
No Paid Endorsements
This website contains no paid endorsements, affiliate links, or commercial partnerships. We do not sell parts or services.
Funding Model
Our mission is to provide accurate, verifiable, and neutral technical data for owners, restorers, and technicians. This site is self-funded.
All specifications and compatibility data verified against officialVOLVO documentation and EU/UK regulatory texts. Where official data is unavailable, entries are marked “Undisclosed“ .
All external links open in new tabs. Please verify current availability of resources.
